NichTek® Products
Categories
Download Brochure
NichTek® Products
Chip Power Inductor
Size(Inches) : 0603 / 0805 / 0806
Inductance : 0.47~2.2μH
Rated Current : 2000~4200mA
Tolerance : ±20%
Choke Coil Power Inductor
Size : 3.0 x3.5~12.0×12.0mm
Inductance : 1~1000μH
Rated Current : 0.06~16A
Tolerance : ±10%~±30%
Molding Type Power Inductor
Size : 2.5×2.0~23.0×23.0mm
Inductance : 0.1~150μH
Rated Current : 0.8~80A
Tolerance : ±20%
AEC-Q200 Qualified
Shielding Power Inductor
Size : 2.0×1.6~8.0×8.0mm
Inductance : 0.24~220μH
Rated Current : 0.3~8.5A
Tolerance : ±20% / ±30%
AEC-Q200 Qualified
Wire Wound Ceramic Inductor
Size(Inches) : 0402 / 0603 / 0805 / 1008
Inductance : 1.0~10000nH
Rated Current : 30~1360mA
Tolerance : ±0.2nH / ±0.3nH / ±2% / ±5% / ±10%
Chip Inductor – Ferrite Type
Size(Inches) : 0603 / 0805
Inductance : 0.047~10μH
Rated Current : 15~300mA
Tolerance : ±10% / ±20%
LAN Transformer
Designed to meet IEEE802.3af / at / bt requirement
Single to multi-port support
Data rate : 10 / 100M & 10 / 100 / 1000BaseT & 2.5G & 5G &10G
PoE Guard
High level surge protection device for equipment with PoE interface.
Surge Level : (IEC-61000-4-5)
Max 150A at 10 / 700μs waveform
ESD Level : (IEC-61000-4-2)
Compact Size : 16.5 x 12.5 x 3.9mm
High forward current, up to 1A
Low leakage current
Low VF
Working Voltage : 57Vdc
Surge LAN Transformer
Designed to meet IEEE802.3af / at requirement
Surge Level : (IEC-61000-4-5)
Differential Mode 2KV
Common Mode 6KV
ESD Level : (IEC-61000-4-2)
Single to multi-port support
Data rate : 10 / 100M & 10 / 100 / 1000BaseT
Surge Pro®
Suitable for Power system equipment for AC inlet at 90~305VAC
Surge protection level up to 10KV
Compatible waveform for 1.2 / 50μs & 10 / 700μs (IEC-61000-4-5)
Hi-Pot Voltage 1.8KV
Short Circuit Protection
IP67